Vivanco PCI GIGABIT ETHERNET CARD - PROGRAMMING Manual do Utilizador descarregar pdf (Página 7)

ABN-182 User’s Guide

Programming Setup

3.1 Programming Support

The bypass test program for ABN -182 supports Linux operating system:

Fedora core/Red Hat 9.0. Test programs base on gcc version 4.1.0

20060304 (Fedora Core 5). And gcc version 3.2.2 20030222(red -hat 9)

The following sections will cover Linux program installation and function

on OS, for other supported, please contact Portwell

3.2 Programming Configuration

The following steps are manual setup for Linux 2.4.X/2.6.X kernel:



Copy ABN-182 bypass program to Linux OS



Select OS kernel version (kernel 2.4 or 2.6) and go into path.



Go into ap path to make test program:

[root

﹫

host]# cd ap

[root

﹫

host ap]# ./complie.sh



Run test program and go into main test screen.

[root

﹫

host ap]# ./test_all

Portwell ABN182 Bypass program version:1.00

Author: Angus Yang

function select:

[1] set to normal mode [2] set to bypass mode

[3] set bypass enable function [4] set Next boot enable function

[5] watch dog timer setting

[ESC] exit program

Select function:1

1. [1]set to normal mode: set bypass mode disable.

2. [2]set to bypass mode: set bypass mode enable.

3. [3]set bypass enable function: set bypass mode when the

system power off

1 2 3 4 5 6 7 8 9 10 11 12 ... 18 19

Sem comentários

Vivanco PCI GIGABIT ETHERNET CARD - PROGRAMMING Manual do Utilizador Página 7